Interlogix NXG-4-RF-BO User Manual

66 xGen Lite Installation and Programming Guide
3. Click Remove.
4. Press the include button on the Z-Wave device you want to remove. See your
Z-Wave device’s manual for instructions.
5. Device will no longer appear in xGenLite menus.
Adding xGenLite to existing Z-Wave network as
Secondary Controller
1. Log in to the panel.
2. Click Settings > Z-Wave Add/Remove.
3. Start the Add process on the primary controller of the existing network.

Interlogix NXG-4-RF-BO Specifications

General

Brand	Interlogix
Model	NXG-4-RF-BO
Category	Security Sensors
Language	English