xGen Lite Installation and Programming Guide 83
DLX900 Software
DLX900 is a tool for programming xGenLite systems. This software is installed
on a PC with Microsoft Windows 7, 8, or 10. It features a graphical interface,
allowing installers and Central Monitoring Stations to program and manage
complex sites.
Customer details and all panel programming are stored in a local database on
the computer. This allows companies to create standard templates for quicker
programming of customer panels.
Installing DLX900
Download the latest version from https://www.interlogix.com/library.
You will need administrator privileges to install DLX900.
Double click the installation file and select the correct region. This will affect the
panels the software will support.
Upgrading from DL900
DLX900 in Australia supports NetworX panels as in DL900.
If DL900 has been installed previously, DLX900 can automatically import and
upgrade the database. It is recommended you save a backup of your database
and ensure you have a copy of DL900 in case you need to revert back.
Once DLX900 is installed, right click the icon, click “More”, and select “Run as
Administrator”
Login to DLX
Default user name and password for DLX900 is UTC 1234.
Enter this twice (once for master access, once for operator access) to login.
You must change the password. To change the default accounts and passwords:
click Program – Setup – Add/change Operators. Click the user then “Set
Password”.
To Next Page
Loading...
Need help?
General
