Chapter 1 — Getting Started
IF61 Fixed Reader User’s Manual 5
For more information, see “Port Pin Assignments” on page 124.
IF61 Port Descriptions
Port Description
AC power Connects the reader to an AC power source.
GPIO General purpose input/output (GPIO) port that
connects the IF61 to industrial controls such as relays
or indicators.
For more information on the IF61 GPIO interfaces,
see “About the GPIO Interfaces” on page 114.
COM1 Connects the IF61 to a desktop PC for configuration.
Use an RS-232 null modem cable (P/N 059167).
COM2 Pass-through serial port for developer-level access to a
serial device.
Ethernet 10BaseT/100BaseTx port that connects the reader to
your Ethernet network. The reader auto-negotiates
with the server to set the best data rate. This port uses
MDI/MDI-X auto-switching so you can connect either
a standard Ethernet cable or a crossover cable.
USB Connect USB devices to the IF61. For more
information, see “Managing USB Devices” on
page 101.
To Next Page
Loading...
