Chapter 4 — Managing, Troubleshooting, and Upgrading the IF61
IF61 Fixed Reader User’s Manual 111
3 Click Upgrade IF61 RFID Fixed Reader. The upgrade
process begins and the firmware is transferred to the IF61.
You see this screen:
During the upgrade, the web browser interface screen does
not auto-refresh. Click Refresh in the web browser to check
the progress of the upgrade. When the login screen appears,
the upgrade is complete and the IF61 has already rebooted.
Upgrading with SmartSystems Server
You can use the SmartSystems Server to upgrade the firmware on
the IF61. The server is part of SmartSystems Foundation, which
is available from the Intermec web site.
Before you can upgrade the IF61, you need:
• SmartSystems Foundation. For more information, go to
www.intermec.com/SmartSystems.
• the IF61 upgrade file. For help, see “Configuring the
Firmware Upgrade” on page 108.
To upgrade the IF61 using SmartSystems Server
1 Install SmartSystems Foundation on your PC and open the
server.
2 Make sure the server and your IF61 are on the same subnet.
3 In the software vault, locate the IF61 upgrade to install.
To Next Page
Loading...
