Chapter 4 — Managing, Troubleshooting, and Upgrading the IF61
110 IF61 Fixed Reader User’s Manual
If you are going to use Intermec SmartSystems Server to
upgrade the IF61, click the SmartSystems Upgrade Bundle
button and then click Next. The bundle install location
screen appears.
4 Click Next to install the upgrade file at the default location,
and then click Install. The upgrade file is installed.
To choose a different location:
a Click Browse to browse to a different location.
b Double-click a folder to choose the location.
c Click Next.
d Click Install. The file is installed at the new location.
5 Click Finish to close the utility.
Installing the Firmware Upgrade
This section describes how to install and run the IF61 firmware
upgrade.
Upgrading from the Web Browser Interface
1 From the menu, click Maintenance > Firmware. The
Firmware screen appears.
2 Click Browse to browse to the location of the upgrade file,
and then double-click the filename. The name of the file
appears in the Enter or select the name of the firmware
upgrade file entry field.
To Next Page
Loading...
