Intermec IF61

Chapter 2 — Configuring Network Settings
IF61 Fixed Reader User’s Manual 45
4 Click Activate Changes to save your settings and
immediately make them active.
Configuring WPA2 Personal (PSK) Security
1 From the menu, click Network Configuration > 802.11 or
802.11 Configuration. The 802.11 Configuration screen
appears.
Parameters for WPA Enterprise Security
Parameter Description
Allowed EAP
Authentication
Method
Specifies which 802.1x authentication
protocol (TLS, TTLS, PEAP, or LEAP) the
IF61 sends to the authentication server.
Username User name for selected protocol.
Password Password for selected protocol.
Validate CA Certificate Enables or disables verification of the server
certificate signature against the certificate
installed on the IF61. If you enable
verification, you need to specify the CA
certificate common name.
CA Certificate
Common Name
Common name for the server certificate.
Reject Expired
Certificates
Check this check box to reject expired
certificates.
Minimum Multicast
Encryption
Choose a data encryption method for non-
unicast transmission/reception:
CCMP (RSN): Use Counter Mode - CBC
MAC Protocol.
TKIP (RSN): (Default) Choose Temporal
Key Integrity Protocol.
WEP (TSN): Choose WEP keying.
Pairwise Encryption
(Unicast)
Choose a data encryption method for unicast
transmission/reception:
TKIP: (Default) Use Temporal Key Integrity
Protocol.
CCMP: Use Counter Mode - CBC MAC
Protocol.