Chapter 3 — Developing and Using RFID Applications
70 IF61 Fixed Reader User’s Manual
3 Click Activate Changes to save your changes and
immediately make them active.
Viewing the BRI Server Log
If you enable logging, you can see a list of BRI server events. You
can save the logfile as a .txt file.
To enable BRI server logging and view the logfile
1 Enable BRI logging as described in the previous section,
“Configuring the BRI Server.”
2 In the left-hand navigation list, click RFID Services > BRI >
BRI Log. The BRI Log screen appears with a list of BRI
events. For more information on server events, see the next
table, “BRI Event Descriptions.”
BRI Server Parameter Descriptions
Parameter Description
Enable External
BRI Connections
Enables/disables external TCP connections to the
BRI server. If this check box is not checked, the
BRI server only accepts connections from
applications installed on the IF61.
BRI TCP Port Specifies the TCP port used for incoming
connections to the BRI server. This port must be
unique for all TCP services running on the IF61.
Valid range is 2189 to 65535. Default is 2189.
Enable Logging Enables/disables logging of BRI server events.
For more information on logging, see the next
section.
To Next Page
Loading...
Need help?
General
