Intermec IF61

Chapter 4 — Managing, Troubleshooting, and Upgrading the IF61
84 IF61 Fixed Reader User’s Manual
You can copy and paste the document into an XML editing
tool.
Using Simple Network Management Protocol (SNMP)
You can access and manage the IF61 from a Simple Management
Network Protocol (SNMP) station. Contact your Intermec
representative for a copy of the management information base
(MIB).
Before you can use an SNMP management station, you need to:
• enable SNMP access to the IF61. By default, SNMP access is
enabled.
• define the IF61 SNMP community strings.
To enable SNMP access and define SNMP community strings
1 From the menu, click Network Configuration > Device
Management. The Device Management screen appears.
Because SNMP access is enabled by default, the Enable
SNMP Access check box is checked, and a list of configurable
settings appears in the SNMP list.