Chapter 1 — Getting Started
IF61 Fixed Reader User’s Manual 7
About the Intermec Ready-To-Work Indicator
The blue Ready-To-Work Indicator shows when an application is
communicating with the Basic Reader Interface (BRI) server on
the IF61. The next table explains the different states of the
Ready-To-Work indicator.
For more information on the BRI server, see “Configuring the
BRI Server” on page 69.
RFID Transmit Flashes when the IF61 RFID reader is
transmitting.
Tag ID Flashes when an RFID tag ID is
successfully read or written to.
IF61 LED Descriptions (continued)
Icon Name Description
Ready-to-Work Indicator Status Descriptions
Status Description
Off IF61 does not have power.
Blinking IF61 is initializing and not yet ready to use, or no
application is currently communicating with the IF61
BRI server.
Steady An application is communicating with the BRI server.
For example, the Ready-to-Work indicator is steady blue
when the IF61 developer tools are enabled (default), or
when the installed SAP device controller or ALE engine
is running. For more information, see “About the IF61
Edgeware Applications” on page 61.
To Next Page
Loading...
