Chapter 3 — Developing and Using RFID Applications
62 IF61 Fixed Reader User’s Manual
Intermec may provide upgrades for existing edgeware
applications, as well as additional edgeware applications you can
install. For help with locating IF61 upgrades at
www.intermec.com, see “Accessing Intermec Web Pages” on
page 107. To install or upgrade edgeware applications, see the
next section.
Upgrading or Installing Edgeware Applications
You use the web browser interface to install or upgrade IF61
edgeware applications, such as the SAP device controller or ALE
engine. For help, see the next procedure.
To install or upgrade edgeware
1 From the menu, click Edgeware Applications > Install
Edgeware. The Install Edgeware screen appears.
2 Click Browse and follow the prompts to navigate to the
location of the .bin file.
3 Click Upload. The application file is installed on the IF61.
When the installation is complete, the IF61 reboots.
Note: Use only .bin files provided by Intermec. To install your
own applications in .zip, .tar, .tar/bz2, or .tar/gz formats, see
“Installing RFID Applications on the IF61” on page 59.
Note: For information on uninstalling edgeware applications, see
“Managing Applications” on page 60.
To Next Page
Loading...
