Chapter 3 — Developing and Using RFID Applications
74 IF61 Fixed Reader User’s Manual
When this screen appears, the four IF61 GPIO interfaces are
turned off.
2 Check the check box for each of the GPIO interfaces you
want to test. When you check the check box, that GPIO
output will be turned on, and its associated GPIO input is
turned on.
3 Click Read and Write GPIO. The GPIO interface state is
changed.
Sending BRI Commands and Running Scripts
You can send BRI commands to the IF61 or load and run a BRI
script through the web browser interface. For more information
on BRI commands and syntax, see the BRI programmer’s
reference manual.
To send BRI commands
1 From the menu, click Edgeware Applications > Developer
To o l s > BRI Commands. The BRI Commands screen
appears.
To Next Page
Loading...
