Chapter 2 — Configuring Network Settings
IF61 Fixed Reader User’s Manual 37
2 Uncheck the Enable Serial Configuration check box.
3 Click Activate Changes to save your changes and
immediately make them active.
Configuring Wireless Security
The IF61 supports a variety of wireless network security
protocols. You can configure:
• WPA2 Enterprise (802.1x) security. For help, see
“Configuring WPA2 Enterprise (802.1x) Security” on
page 47.
• WPA2 Personal (PSK) security. For help, see “Configuring
WPA2 Personal (PSK) Security” on page 45.
• WPA Enterprise (802.1x) security. For help, see “Configuring
WPA Enterprise (802.1x) Security” on page 43.
• WPA Personal (PSK) security. For help, see “Configuring
WPA Personal (PSK) Security” on page 41.
• Dynamic WEP/802.1x security. For help, see “Configuring
Dynamic WEP/802.1x Security” on page 39.
• basic WEP security. For help, see the next section.
Note: To configure wireless security, the 802.11 radio must be
enabled. For help, see “Configuring the 802.11 Radio” on
page 23. This section assumes you have already enabled the radio.
To Next Page
Loading...
