Chapter 4 — Managing, Troubleshooting, and Upgrading the IF61
IF61 Fixed Reader User’s Manual 101
Or, click Cancel to close the confirming message without
restoring defaults.
To restore defaults via a serial connection
1 Open a serial connection to the IF61. For help, see “Opening
a Serial Connection to the IF61” on page 96.
2 In the login field, type
restore_defaults and then press
Enter.
3 In the Password field, type
restore_defaults and then
press Enter. The IF61 reboots and the default settings are
restored.
Rebooting the IF61
You can reboot the IF61 from the web browser interface as
described in the next procedure. For example, you may need to
reboot the IF61 to enable changes in an application.
To reboot the IF61
1 From the menu, click Maintenance > Reboot. The Reboot
screen appears.
2 Click Reboot to reboot the IF61. You need to log in again
after the IF61 reboots.
Managing USB Devices
You can connect USB devices such as flash drives or memory
sticks to the IF61 USB ports. By default, the IF61 looks for USB
devices installed in its USB ports and shows the devices in the
local file system.
To Next Page
Loading...
