Intermec IF61

Chapter 3 — Developing and Using RFID Applications
64 IF61 Fixed Reader User’s Manual
2 Change RFID settings as needed. For help, see the next
section.
3 Click Activate Changes to save your changes and
immediately make them active.
About BRI Attribute Settings
This section explains the BRI attribute settings that control how
the reader operates. For more information, see the Basic Reader
Interface Programmer’s Reference Manual (P/N 937-000-xxx).
Tag Types
Check the appropriate check boxes to enable RFID operations
for these kinds of tags:
• EPC Class 1 Gen 2 (default)
• Phillips v1.19
• ISO6B/G1
• ISO6B/G2
This setting is equivalent to the TAGTYPE BRI attribute.