Chapter 4 — Managing, Troubleshooting, and Upgrading the IF61
IF61 Fixed Reader User’s Manual 95
5 Enter the password and press Enter. The $-prompt appears.
Your Telnet session with the IF61 is established.
Using a Communications Program
To access the Linux shell via a communications program, you
need a null-modem cable (P/N 059167).
To access the Linux shell through a communications program
1 Open a serial connection to the IF61 as described in the next
section, “Opening a Serial Connection to the IF61.”
2 Type the login for the IF61 (default is
intermec) and press
Enter.
3 Type the password for the IF61 (default is
intermec) and
press Enter. The Linux $-prompt appears.
You now have access to the IF61 Linux shell.
Note: For more secure access to the IF61, use a Secure Shell
(SSH) connection. For help, see “Opening a Secure Shell (SSH)
Connection” on page 93.
To Next Page
Loading...
