Chapter 4 — Managing, Troubleshooting, and Upgrading the IF61
IF61 Fixed Reader User’s Manual 97
The serial connection is established. From here you can do
these tasks:
• You can assign an initial IP address to the IF61 for
configuration. For help, see “Assigning an Initial IP
Address” on page 9.
• You can restore default settings. This does not remove
applications you have installed on the IF61. For help, see
“To restore defaults via a serial connection” on page 101.
• You can access the Linux shell. For help, see “Accessing the
IF61 via the Linux Shell” on page 93.
Maintaining the IF61
The Maintenance menu lets you view IF61 parameters and
statistics, including a list of logged events. You may need this
information if you need to call Intermec Product Support.
Viewing the System Log
The System Log screen shows events that have been logged by the
IF61. These events are cleared when the IF61 loses power or is
rebooted.
To view the System Log screen
1 From the menu, click Maintenance > System Log. The
System Log screen appears. This screen is read-only.
To Next Page
Loading...
