Intermec IF61

Chapter 4 — Managing, Troubleshooting, and Upgrading the IF61
IF61 Fixed Reader User’s Manual 85
2 Configure SNMP settings for your network. For help, see the
next table.
3 Click Activate Changes to save your changes and
immediately make the changes active.
SNMP Community Parameter Descriptions
Parameter Description
Enable SNMP Access Uncheck this check box to disable SNMP
access to the IF61. SNMP access is enabled by
default.
SNMP Community
(Read-Only)
Password for read-only access. Range is 1 to 15
characters, case-sensitive. Default is
public.
SNMP Community
(Read/Write)
Password for read/write access. Range is 1 to
15 characters, case-sensitive. Default is
private.
SNMP Trap Target 1 Authoritative name for trap target 1.