IP-COM AP325 - Page 78

Wireless Access Point
User Guide
Parameter Description
Data
will forward lots of invalid broadcast packets, which may affect normal packets
transmission. However, this function can filter broadcast packets and reduce
airtime consumption, ensuring bandwidth of normal packets transmission.
−
Disable: Click the circle beside it to disable the filtering broadcast data
function.
−
Enable: Click the circle beside it to enable the filtering broadcast data
function.
Mode Option
It specifies what packets AP will accept after users enable filtering broadcast data
function, consisting the following two modes:
−
Only accept DHCP and ARP packets: The AP will only accept data from DHCP
and ARP packets.
−
Only accept ARP packets: The AP will only accept data from ARP packets.
71