Iseki SBC950 - Page 106

CHAPTER 4. INSPECTION AND MAINTENANCE OF MAJOR PARTS
105
SCMB60
Ref.No Filling points Lubricants Quantity: liter (Imp. gal.)
1 Bevel gear case (LH) Gear oil SAE 80 0.85±0.02 (0.19±0.01)
2 Bevel gear case (RH) Gear oil SAE 80 0.4±0.02 (0.09±0.01)
3 Gauge wheel
Grease
Inject until grease
overflows
4 Drive shaft As required
5 Roller As required
6 Cup ring
Inject until grease
overflows
7 Folk wheel