CHAPTER 3. INSPECTION AND MAINTAINANCE OF MAJOR PARTS
119
3. PERIODICAL INSPECTION TABLE
IMPORTANT: • Above mentioned service intervals are for normal usage. If working conditions are harder, earlier ser-
vice is recommended.
• If special skill or special tool are required or you feel difficulty in maintenance, consult your dealer.
Check points Intervals after that Judgement criteria
Ref.
page
Inspection and
servicing intervals
(hours of operation)
Pre-
operation
50 100 150 200 250
Greasing points
Bolts and nuts
Pins and clips
Rear net
Grease up after every 50hrs
There should be no loose
ones.
There should be no lost or
deformed ones.
There should be no
clogginess.
-
-
116
118
: Inspection, replenishment, and adjustment
: Cleaning and washing
: Replacement : Consult your dealer.
To Next Page
Loading...
