CHAPTER 1. FOR SAFE OPERATION
17
9.21. To reduce the fire hazard, keep the engine,
muffler (silencer), battery area, and fuel storage
area free of debris.
9.22. If fuel has to be drained, this should be done
outdoors.
9.23. Check the brake(s) on the front mower frequently
and adjust and service the brake(s) as required.
9.24. Replace faulty mufflers (silencers).
9.25. Do not change the engine governor settings or
overspeed the engine. Operating an engine at an
excessive speed can increase the risk of personal
injury.
9.26. The grass catcher components are subject to
wear and damage, exposing you to moving parts
or thrown objects. Frequently check and replace
them with the manufacturer's recommended parts
when necessary.
9.27. Never attempt unauthorized modification of the
front mower as this could be very hazardous.
Damaged or worn parts should be replaced
with ISEKI genuine spare parts. Unauthorized
parts may cause breakdown of the front mower,
accidents, and ISEKI warranty to expire.
9.28. Make sure all fixing bolts or nuts are securely
tightened especially those that hold the mower
blades.
9.29. Check that all safety devices are in place and
operating properly.
Parts code of blade Punched ID
SCMA54
8668-306-051-00
8668-306-052-00
8668E
8668F
SCMB60
8680-306-001-00
8680-306-002-00
8680C
8680D
SSM54 8657-306-005
8657D
To Next Page
Loading...
