SF224,235
28
On the collector
(1) Collector caution label
(Code No. 8664-955-002-0)
WARNING: RISK OF CRUSHING
Stay clear of the lifted container
(2) Hot-part caution label
(Code No. 8595-901-007-0)
WARNING: HOT SURFACES, RISK OF BURNS ON
HANDS AND FINGERS
Stay clear of the heated parts until they cool down
sufficiently.
(3) Discharge label
(Code No. 8595-901-005-0)
WARNING: RISK OF INJURY
Stay away of the opening of door because stones or
other hard objects ejected from the blower may hit you.
(4) Maintenance label
(Code No. 1593-901-015-0)
WARNING: BEFORE SERVICING
Shut off the engine and remove the starter key before
performing maintenance or repair work.
・
Maintenance of the caution labels
- The labels should always be clearly seen, that is,
nothing should obscure them.
- When they have become dirty, wash them with
soapy water and wipe off with soft cloth.
- If any of them are torn or lost, order new labels from
your dealer.
- A new label should be placed in the same place
where the old one was located.
- When sticking on a new label, clean the place to
enable the label to stick and squeeze out all air
bubbles trapped under it.
- When replacing a part with a caution label stuck
on, a new caution label should also be ordered and
installed.
2
1
3
1
2
4
To Next Page
Loading...
