EasyManua.ls Logo

Iseki SBC950 - Page 76

Iseki SBC950
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 10. TROUBLESHOOTING
75
Troubles
Engine knocks.
Engine output is insufficient.
Engine is overheated.
Oil pressure lamp is blinking
Exhaust fumes are white.
Exhaust fumes are black.
Presumable causes
Defective injection nozzles
Incorrect valve clearances
No fuel
Clogged air cleaner
Engine is overloaded.
Improper fuel
Engine is overheated.
Throttle lever is not in the high speed
position.
Insufficient compression
Improper valve clearances
Defective injection pump
Defective injection nozzles
Incorrect injection timing
Low engine coolant level
Clogged radiator fins and screen
Low engine oil level
Clogged air-intake openings
Engine is overloaded.
Clogged engine oil filter
Low engine oil level
Low engine oil viscosity
Clogged engine oil filter
Defective oil pump
Defective oil pressure switch
Clogged air cleaner
Too high engine oil level
Insufficient fuel injection
Defective fuel
Clogged intake system
Remedies
Consult your dealer.
Consult your dealer.
Supply with fuel.
Clean element.
Raise cutting height or slow
down front mower.
Use proper diesel fuel.
Cool down engine.
Shift it there securely.
Consult your dealer.
Consult your dealer.
Consult your dealer.
Consult your dealer.
Consult your dealer.
Replenish
Clean them.
Replenish engine oil to upper
limit.
Clean air-intake.
Raise cutting height or slow
down front mower.
Ask your dealer to replace it
with new one.
Add oil to upper limit.
Replace with oil of higher
viscosity.
Ask your dealer to replace it
with new one.
Consult your dealer.
Consult your dealer.
Clean element.
Drain oil to upper limit.
Consult your dealer.
Use proper fuel.
Clean air cleaner element.

Table of Contents

Related product manuals