Chapter 5 Troubleshooting
ID NO.
TITLE ERROR CONTENTS SOLUTION
0321 PRICE IS NOT
PROGRAMMED
Price is not programmed.
<SUB ERROR No.>
0: No Price
1: No Weight
2: No Unit Price
3: When campaign is [9:S.P. ARB.],
the quantity is not matching the
programmed quantity in campaign
setting. (Ex. Unit is set to 2 in the
campaign but actual quantity is 3.)
When it is set not to show error
message at [Error Process] even
price is 0, this will not appear.
[OK]
0322 The machine
moves the parts to
original (home)
position.
The machine moves the parts to
original (home) position.
It appears only when the machine is
turned ON.
[OK]
0325 WEIGT OVER
LIMIT
Weight value is out of the set
limitation (Over or Under).
<SUB ERROR No.>
0: Actual weight is out of range
1: Fixed Weight is out of range
- When actual weight is out of
range:
[PRINT]: Will not be an error
[STOP]: Will not check the weight
until the item is called up next time
Membrane key is pressed: Error
display will close
- Fixed Weight is out of range: [OK]
Please check the weight value.
0338 PROMOTION IS
BEING SET
This is to confirm whether the
promotion is fine to start or not.
[ACCEPT]: Execute the promotion.
[CANCEL]: Do not execute the
promotion.
Select whether to execute the
campaign or not.
0339 LOWER VALUE
IS LESS THAN
FIXED WEIGHT
Under limitation is set to less than
fixed weight.
[EXEC]: It overwrites the lower
limitation with the fixed weight and
release the error.
[STOP]: Release the error.
Confirm the under limitation value and
fixed weight value.
5-11
To Next Page
Loading...