Chapter 5 Troubleshooting
ID NO.
TITLE ERROR CONTENTS SOLUTION
0350 TRAY No. IS NOT
PROGRAMMED
Tray No. is not programmed to the
product.
When you operate [WRAP] or
[WRAP + PRINT], selecting the tray
is necessary.
When you operate only [PRINT],
change the [WRAP MODE] to
[PRINT].
When you operate [WRAP] or
[WRAP +PRINT], selecting the tray is
necessary.
[OK]
0351 LABEL IS
REMAINING
Label is remaining.
The operation that was prohibited
during the production was
implemented when there was an item
in produce around the lift to the
discharging part.
[OK]
Wait until the item is discharged and
remove the item and a label at the
printer.
0352 DRAWER OPEN
LOG ERROR
It failed to add the drawer open log
record.
Usually, it records when and who
opened the drawer but it failed.
[EXEC]: Retry adding the log.
[CANCEL]: Do not write the log.
0355 TRAY No. IS NOT
PROGRAMMED
Tray No. is not programmed.
The tray No. that is programmed at
PLU does not exist in the tray master.
Select the tray No. when you operate
[WRAP] or [WRAP+PRINT].
* When the tray No. is not
programmed in the tray master, it is
necessary to program the tray
additionally.
When you operate only printing,
change the [WRAP MODE] to
[PRINT].
When you operate [WRAP] or
[WRAP +PRINT], selecting the tray is
necessary.
[OK]
0361 POWER IS ON It is the error for recording the log for
turning on the machine.
No error display
[OK]
0383 POS FORMAT
CHECK ERROR
Error for setting the wrong POS
format.
[OK]
0384 POS TYPE
CHECK ERROR
Error for setting the wrong POS type. [OK]
5-13
To Next Page
Loading...
Need help?
General