Chapter 5 Troubleshooting
ID NO.
TITLE ERROR CONTENTS SOLUTION
0416 MOTOR FOR L/R
FOLDERS IS
ABNORMAL
Error for the motor of L/R folders
The motor for L/R folders did not
move properly.
<Sub-error No.>
0001: The movement did not
complete even after
protection timer finished.
Cannot return to home
position.
0010: L/R folders are not at the
home position when L/R
folders tried to move.
0020: L/R folders are not at the
home position when main
cam motor tried to move.
0101: It normally returns to the
home position before it starts
the unit test movement, but
L/R folders are not at the
home position even after a
certain time.
0103: L/R folders are not at the
home position even after a
certain time when the unit
test movement of L/R folders
returning.
[RETURN]
<Check Point>
1. L/R folders motor driver P-1006 [A2]
2. L/R folders motor [M3]
3. L/R folders home position sensor
[B2]
4. Connection of P-1004 and P-1006
5. Check if P-1006 is P-1006*-4.
0417 OUTFEED
PUSHER IS NOT
ORIGINAL
POSITION
Out-feed pusher is not at the home
position.
When the out-feed pusher starts
moving, the out-feed pusher’s home
position sensor did not detect the
out-feed pusher
Without the out-feed pusher home
position sensor (no connection
between P-1004 XJ14 18 pin and 20
pin), as the confirmation function of
out-feed pusher home position
becomes ineffective, this error does
not appear.
[RETURN]
5-17
To Next Page
Loading...