Chapter 1 Overview
●Communications Cable for Weighing Unit
Attach the communications cable for the weighing unit to the side of UNI-7.
Communications cable
●Adjusting Gap between UNI-7 and Wrapper
Rotate UNI-7's adjusting feet to adjust the height so that the gap between UNI-7 and the wrapper unit
should be about the diameter of the cable.
If the gap between UNI-7 and the wrapper is insufficient, the cable may be damaged due to stress.
Gap between UNI-7 and wrapper:
Diameter of the cable
Adjusting
feet
1-14
To Next Page
Loading...