ITech IT-M7700 Series - [Source:]Normal:voltage:ac[:Level][:Immediate][:Amplitude]; [Source:]Normal:frequency[:Level][:Immediate]

3-phase/series commands
Copyright© Itech Electronic Co., Ltd. 89
Syntax
[SOURce:]NORMal:PHASe:DEGree <A|B|C>,<NRf>
Arguments
<A|B|C> phase, <NRf> phase difference
Query Syntax
[SOURce:]NORMal:PHASe:DEGree? <A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
[SOURce:]NORMal:VOLTage:AC[:LEVel][:IMMediate][:
AMPLitude]
This command sets the AC voltage of the power supply.
Syntax
[SOURce:]NORMal:VOLTage:AC[:LEVel][:IMMediate][:AMPLitude]
<A|B|C|ALL>,<NRf>
Arguments
<A|B|C|ALL> phase, <NRf> AC voltage
Query Syntax
[SOURce:]NORMal:VOLTage:AC[:LEVel][:IMMediate][:AMPLitude]?
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
[SOURce:]NORMal:FREQuency[:LEVel][:IMMediate]
This command sets the AC frequency of the power supply. This command can
synchronize all frequencies.
Syntax
[SOURce:]NORMal:FREQuency[:LEVel][:IMMediate] <NRf>