ITech IT-M7700 Series Programming Guide

Multi-Channel command(IT-M7723)
Copyright© Itech Electronic Co., Ltd. 72
Chapter 11 Multi-Channel command(IT-M7723)
Multi-Channel commands is a special command of IT-M7723, but it’s not
suitable for IT-M7721/IT-M7722/IT-M7721L/IT-M7722L.
CHANnel
This command is used to set the address of the host computer to send data to
the online instrument.
Syntax
CHANnel <NR1>
Arguments
<NR1> 1 ~ 126 (1 to 1 transmission)
127 (1 to multi transmission)
Query Syntax
CHANnel?
Returns
<NR1>
Note
For the multi-channel operation method, please refer to the content of the multi-channel
function chapter of "IT-M7700 User Manual".
CHANnel:LINK
This command is used to determine whether there is a conflict between the IDs
of the master and the slaves.
Syntax
CHANnel:LINK
Arguments
None

ITech IT-M7700 Series Specifications

General

Brand	ITech
Model	IT-M7700 Series
Category	Portable Generator
Language	English