ITech IT-M7700 Series Programming Guide

STATus Subsystem
Copyright© Itech Electronic Co., Ltd. 19
STATus:OPERation:ENABle
Sets the value of the enable register for the Operation Status group. The enable
register is a mask for enabling specific bits from the Operation Event register to
set the OPER (operation summary) bit of the Status Byte register.
Syntax
STATus:OPERation:ENABle <NR1>
Arguments
0~255
Default value
See *PSC.
Example
STATus:OPERation:ENABle 128
Query Syntax
STATus:OPERation:ENABle?
Returns
<NR1>
STATus:OPERation:NTRansition
Sets the value of the NTR (Negative-Transition) registers for the Operation
Status group.
Syntax
STATus:OPERation:NTRansition <NR1>
Arguments
0~255
Default value
See *PSC.
Example
STATus:OPERation:NTRansition 128

ITech IT-M7700 Series Specifications

General

Brand	ITech
Model	IT-M7700 Series
Category	Portable Generator
Language	English