ITech IT-M7700 Series - Measure[:Scalar]:Curr:thd; Measure[:Scalar]:Power:reactive; Measure

3-phase/series commands
Copyright© Itech Electronic Co., Ltd. 105
MEASure[:SCALar]:CURR:THD?
This command reads the total current harmonic distortion.
Syntax
MEASure[:SCALar]:CURR:THD? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
MEASure[:SCALar]:POWer:REACTive?
This command reads the reactive power.
Syntax
MEASure[:SCALar]:POWer:REACTive? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
MEASure?
This command is used to re-read the values of Arquments such as Vrms, Vdc,
Irms, Idc, Ipk_plus, Ipk_minus, W (Real Power), PF, IPmax, VA, Q(VAR), VTHD,
Freq, Vpeak, VAC, IAC, ITHD.
Syntax
MEASure? <A|B|C>
Arguments
<A|B|C>
Returns
< Vrms,Vdc,Irms,Idc,Ipk_plus,Ipk_minus,W(Real
Power),PF,IPmax,VA,Q(VAR),VTHD,Freq,Vpeak,VAC,IAC,ITHD>