ITech IT-M7700 Series - Fetch[:Scalar]:Power:apparent; Fetch[:Scalar]:Power:pfactor; Fetch[:Scalar]:Frequency

3-phase/series commands
Copyright© Itech Electronic Co., Ltd. 98
FETCh[:SCALar]:POWer:APParent?
This command reads the apparent power.
Syntax
FETCh[:SCALar]:POWer:APParent? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
FETCh[:SCALar]:POWer:PFACtor?
This command reads the power factor.
Syntax
FETCh[:SCALar]:POWer:PFACtor? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
FETCh[:SCALar]:FREQuency?
This command reads the frequency.
Syntax
FETCh[:SCALar]:FREQuency?
Arguments
None
Returns
< NRf >