ITech IT-M7700 Series - List:record:num; List:repeat; List:endstate

LIST Subsystem(IT-M7700)
Copyright© Itech Electronic Co., Ltd. 62
Query Syntax:
LIST:STATe?
Returns:
<OFF | 1-5>
LIST:RECOrd:NUM
This command is used to set the List step number.
Syntax
LIST:RECOrd:NUM <NR1>
Arguments：
<1~50>
Query Syntax:
LIST:RECOrd:NUM?
Returns:
<1~50>
LIST:REPeat
This command is used to set the running times of list file.
Syntax
LIST:REPeat <NR1>
Arguments：
1~50000
Query Syntax:
LIST:REPeat?
Returns:
<NR1>
LIST:ENDState
This command is used to set end of List.