ITech IT-M7700 Series - Measure[:Scalar]:Current:peak:plus; Measure[:Scalar]:Current:peak:minus; Measure[:Scalar]:Thd

3-phase/series commands
Copyright© Itech Electronic Co., Ltd. 104
MEASure[:SCALar]:CURRent:PEAK:PLUS?
This command reads the positive plus peak current.
Syntax
MEASure[:SCALar]:CURRent:PEAK:PLUS? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
MEASure[:SCALar]:CURRent:PEAK:MINUs?
This command reads the positive minus peak current.
Syntax
MEASure[:SCALar]:CURRent:PEAK:MINUs? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
MEASure[:SCALar]:THD?
This command reads the total voltage harmonic distortion.
Syntax
MEASure[:SCALar]:THD? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>