ITech IT-M7700 Series - Measure[:Scalar]:Power[:Real]; Measure[:Scalar]:Power:apparent; Measure[:Scalar]:Power:pfactor

3-phase/series commands
Copyright© Itech Electronic Co., Ltd. 102
MEASure[:SCALar]:POWer[:REAL]?
This command reads the active power.
Syntax
MEASure[:SCALar]:POWer[:REAL]? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
MEASure[:SCALar]:POWer:APParent?
This command reads the apparent power.
Syntax
MEASure[:SCALar]:POWer:APParent? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
MEASure[:SCALar]:POWer:PFACtor?
This command reads the power factor.
Syntax
MEASure[:SCALar]:POWer:PFACtor? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>