ITech IT-M7700 Series - [Source:]Normal:offtimer:mode; [Source:]Normal:offtimer

126 pages

To Next Page

To Previous Page

SOURce Subsystem(IT-M7700)

Query Syntax：

[SOURce:]NORMal:SURGETRAP:PERCENT?

Returns：

<NRf>

[SOURce:]NORMal:OFFTIMER:MODe

This command is used to set the output timer function.

Syntax

[SOURce:]NORMal:OFFTIMER:MODe <0|1|OFF|ON>

Arguments

<0|1|OFF|ON>

Query Syntax：

[SOURce:]NORMal:OFFTIMER:MODe?

Returns:

<OFF|ON>

[SOURce:]NORMal:OFFTIMER

This command is used to set the setting value of output timer (unit: ms).

Syntax

[SOURce:]NORMal:OFFTIMER <NR1>

Arguments

<NR1> 10~10000000

Query Syntax

[SOURce:]NORMal:OFFTIMER?

Returns

<NR1>

Other manuals for ITech IT-M7700 Series