ITech IT-M7700 Series - List:reco Rder; List:save

LIST Subsystem(IT-M7700)
Copyright© Itech Electronic Co., Ltd. 66
Arguments：
<NR1>,<String>
⚫ <NR1>: Edit index number of Record.
⚫ <String>: Record description.
Example
LIST:RECOrder 1,"0,1,100.0,110.0,0.0,60.0,1,0.0,180.0,1,1,1,20"
Query Syntax：
LIST:RECOrder? <NR1>
Returns：
<String>
LIST:RECOrder?
This command is used to query the record Arguments of a single Step in the
List.
Syntax
LIST:RECOrder? <NR1>
Arguments：
<NR1>
<NR1>: Step index.
Returns:
<String>
<String>: The description of the Record is as follows:
<Type,Wave Type,Level,Vac,Vdc,Freq,Time,Start Phase,Stop
Phase,Kac,Kdc,Kfreq,Repeat>
LIST:SAVE
This command is used to save the list file in a nonvolatile memory.
Syntax
LIST:SAVE <NR1>