ITech IT-M7700 Series - Measure[:Scalar]:Frequency; Measure[:Scalar]:Current:peak; Measure[:Scalar]:Voltage:peak

3-phase/series commands
Copyright© Itech Electronic Co., Ltd. 103
MEASure[:SCALar]:FREQuency?
This command reads the frequency.
Syntax
MEASure[:SCALar]:FREQuency?
Arguments
None
Returns
< NRf >
MEASure[:SCALar]:CURRent:PEAK?
This command reads the positive peak current.
Syntax
MEASure[:SCALar]:CURRent:PEAK? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
MEASure[:SCALar]:VOLTage:PEAK?
This command reads the positive peak voltage.
Syntax
MEASure[:SCALar]:VOLTage:PEAK? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>