ITech IT-M7700 Series Programming Guide

IEEE-488 Common Commands
Copyright© Itech Electronic Co., Ltd. 22
Query Syntax
*ESE?
Returns
<NR1>
The value returned is the binary-weighted sum of all bits set in the register.
Related Command
*ESR? *PSC *STB?
The following table describes the Standard Event Status register bit
assignments.
Bit
7
6
5
4
3
2
1
0
Name
PON
n.u
CME
EXE
DDE
QYE
n.u
OPC
Decimal
Value
128
32
16
8
4
1
*ESE?
Query the value of the enable register set by the standard event status group.
Query Syntax
*ESE?
Arguments
None
Returns
<NR1>
The value returned is the binary-weighted sum of all bits set in the register.
*ESR?
Event status event query. Reads and clears the event register for the Standard
Event Status group. The event register is a read-only register, which latches all
standard events.
Query Syntax
*ESR?

ITech IT-M7700 Series Specifications

General

Brand	ITech
Model	IT-M7700 Series
Category	Portable Generator
Language	English