ITech IT-M7700 Series Programming Guide

FETCh & MEASure Subsystem
Copyright© Itech Electronic Co., Ltd. 86
Returns：
< NRf >
MEASure[:SCALar]:CURRent:THD?
This command reads the current harmonic distortion.
Syntax
MEASure[:SCALar]:CURRent:THD?
Arguments：
None
Returns：
< NRf >
MEASure[:SCALar]:POWer:REACTive?
This command reads the reactive power.
Syntax
MEASure[:SCALar]:POWer:REACTive?
Arguments：
None
Returns：
< NRf >
MEASure?
This command is used to re-read the values of Arquments such as Vrms, Vdc,
Irms, Idc, Ipk_plus, Ipk_minus, W (Real Power), PF, IPmax, VA, Q(VAR), VTHD,
Freq, Vpeak, VAC, IAC, ITHD.
Syntax
MEASure?
Arguments：
None

ITech IT-M7700 Series Specifications

General

Brand	ITech
Model	IT-M7700 Series
Category	Portable Generator
Language	English