SCPI Command Introduction
Copyright© Itech Electronic Co., Ltd. 11
command:
DISPlay:TEXT <quoted string>
For example, the following commands display message of "WAITING..."
(without quotation marks) on the front panel of the instrument.
DISP:TEXT "WAITING..."
Single quotation marks may also be used to display the same message.
DISP:TEXT 'WAITING...'
<CPD>: character program data;
<SPD>: string program data. String parameters enclosed in single or
double quotes.
1.7 Communication Interface
IT-M7700 have five standard communication interfaces: RS232, USB, GPIB,
LAN and CAN. The customer can choose any one according to his demands.
Please refer to user manual for detailed introductions of the remote interface
connections.
To Next Page
Loading...
Need help?
General
