ITech IT-M7700 Series Programming Guide

SYSTem Subsystem
Copyright© Itech Electronic Co., Ltd. 28
Syntax:
SYSTem:CLEar
Arguments:
None
Returns:
None
SYSTem:REMote
This command is used to set the instrument to the remote control mode via the
communication interface. Except the [Shift]+[Link]( Local) key and [On/Off]
key on the front panel, other keys are locked and cannot be used.
Syntax：
SYST:REM
Arguments：
None
Query Syntax：
None
SYSTem:LOCal
This command is used to set the instrument to local mode, i.e. panel control
mode. All keys on the front panel will be available after executing this
command.
Syntax
SYST:LOC
Arguments：
None
Query Syntax：
None

ITech IT-M7700 Series Specifications

General

Brand	ITech
Model	IT-M7700 Series
Category	Portable Generator
Language	English