ITech IT-M7700 Series - [Source:]Normal:voltage:ac:min[:Level]; Protect:rms:current:max[:Level]; Protect:rms:current:min[:Level]

3-phase/series commands
Copyright© Itech Electronic Co., Ltd. 94
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
[SOURce:]NORMal:VOLTage:AC:MIN[:LEVel]
This command sets the minimum AC voltage of the power supply.
Syntax
[SOURce:]NORMal:VOLTage:AC:MIN[:LEVel] <A|B|C|ALL>,<NRf>
Arguments
<A|B|C|ALL> phase,<NRf> the minimum AC voltage
Query Syntax
[SOURce:]NORMal:VOLTage:AC:MIN[:LEVel]? <A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
PROTect:RMS:CURRent:MAX[:LEVel]
This command is used to set the maximum value of the OCPrms setting value.
Syntax
PROTect:RMS:CURRent:MAX[:LEVel] <A|B|C|ALL>,<NRf>
Arguments
<A|B|C|ALL>,<NRf>
Query Syntax
PROTect:RMS:CURRent:MAX[:LEVel]? <A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
PROTect:RMS:CURRent:MIN[:LEVel]
This command is used to set the minimum value of the OCPrms setting value.
Syntax
PROTect:RMS:CURRent:MIN[:LEVel] <A|B|C|ALL>,<NRf>