ITech IT-M7700 Series Programming Guide

IEEE-488 Common Commands
Copyright© Itech Electronic Co., Ltd. 24
Query Syntax
*OPC?
Returns
<NR1>
*RST
Resets the instrument to pre-defined values that are either typical or safe.
Syntax
*RST
Arguments
None
*SRE
Service request enable command. This sets the value of the Service Request
Enable register. This determines which bits from the Status Byte Register are
summed to set the Request for Service (RQS) summary bit. A 1 in any Service
Request Enable register bit position enables the corresponding Status Byte
register bit.
Syntax
*SRE <NR1>
Arguments
0～255
Default value
See *PSC.
Example
*SRE 128
Query Syntax
*SRE?
Returns
<NR1>

ITech IT-M7700 Series Specifications

General

Brand	ITech
Model	IT-M7700 Series
Category	Portable Generator
Language	English