janitza UMG 804 - Page 17

www.janitza.com UMG 804
17
· Alarming:
provides alarms and status points with user-de-
fined thresholds.
· HTML interface:
easy read/write access to all device configurati-
ons and parameters.
· Lock device settings:
protection against manipulations. Especially use-
ful for billing applications in data centers.
· Waveform capture on event per channel:
captures pre and post-event waveform data on
all 96 channels simultaneously based on user-de-
fined thresholds. Data is stored locally on a USB
flash drive and may be uploaded over the net-
work using the HTML console.
· BACnet interface:
supports BACnet for all True Meter and Single
Channel data.
· Sag/Swell detection and logging:
stores waveform capture logs and CBEMA / ITIC
violation logs and permits transfer of files over the
network
· Virtual meters:
allows up to 96 circuits to be grouped to provide
a total output for the combined circuits.
· Potential transformer scaling:
allows for easy scaling of connected potential
transformers.
· REST API interface:
use REST HTML queries to obtain meter data.
· SNMP v2 interface:
supports SNMP v2 for all True Meter and Single
Channel data.
· CBEMA / ITIC compliance monitoring:
captures, logs and categorizes any voltage event
that is outside of the CBEMA / ITIC power quality
window.
Note:
SNMP and BACnet do currently not support alar-
ming and are limited to single channel and True
Meter/Virtual Meter readings