www.janitza.com UMG 804
3
Subject to technical changes.
The content of our documentation has been compiled with the utmost care and is based on the latest
information available to us. Nevertheless, we would like to point out that the updating of this document
cannot always be performed simultaneously with the further technical development of our products.
Information and specifications can be changed at any time.
Please consult www.janitza.com for information on the current version.
The English version is the original version of the documentation.
FCC Part 15 information Note:
This equipment has been tested by the manu-
facturer and found to comply with the limits for a
class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not ins-
talled and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful inter-
ference in which case the user will be required to
correct the interference at his own expense. Modi-
fications to this product without the express autho-
rization of the manufacturer nullify this statement.
This Class A digital apparatus complies with
Canadian ICES-003.
This symbol indicates an electrical shock
hazard exists.
Documentation must be consulted where
this symbol is used on the product.
To Next Page
Loading...
Need help?
General
