65
1
2
3
4
5
771A-B:1-2.00-002
771A-B:1-3.00-005
Ver.004
Ver.004
1. Press and hold the start/stop button and the thread
cutter button, and turn the power switch on.
2. Press and hold the trace button and the “ ” jog
button of the RCS unit, and turn the power switch on.
After the LCD display indicates “Finish”, turn the power
switch off.
Press and hold the start/stop button and the thread cutter
button, and turn the power switch on.
Make sure that the LCD display shows the version number
as follows.
Version 2.00:
A: The version number remains the same.
B: The LCD display shows “771A-B:1-2.00-002”.
S: The LCD display shows “Ver.004”.
Make sure that the LCD display shows the version number
as follows.
Version 3.00:
A: The version number remains the same.
B: The LCD display shows “771A-B:1-3.00-005”.
S: The LCD display shows “Ver.004”.
Be sure to follow the steps in order.
Instructions for Updating MB-7/eXpressive 970
(for machine only)
No change
No change
No change
No change
Version 2.00
Version 3.00
To Next Page
Loading...
