JETI model Duplex DS-16 - Page 104

computer radio control system
EN
“Default” Wireless Mode
a. Selection
b. Primary RF module bind control menu line
4. 4.
“Student” Wireless Mode
If student’s transmitter if set to “Student” mode, any dual-rates, mixes
or any other advanced features are disabled in the student’s
transmitter.
a) Mode Selection.
b) Binding initialization of the Instructor transmitter‘s primary RF
module or special wireless “Trainer” module by JETI.
c) Channel function assignment.
a) Mode Selection.
b) Assigned trainer function switch, when the switch is activated,
control of the model is transferred to the student.
c) Binding initialization of the Instructor transmitter‘s secondary
RF module with student’s transmitter.
d) Channel function assignment. Some or all of the functions can
be controlled by student.
e) Instructor/Student control authority values. This setting limits
the amount of control for the student. If the instructor is
assigned a 60% control value to a particular channel, and
student is assignedonly a 40% value. The instructor can easily
override student’s input and correct the model’s flight.
“Instructor” Wireless Mode (* depending on equipment)
a
b
a
b
c
a
b
d
c
f
e
g
103