computer radio control system
EN
3. To edit the mix simply highlight the mix
and press the “F4 (Edit)” button to go into
the selected mix’s advanced menu.
a. Flight mode setting configuration
b. Curve type icon
c. Switch assignment for the spoiler mix function
d. Delay for the mix function deployment or retraction
The basic configuration of the butterfly mix (also known as crow) is
created by using ailerons, flaps, and elevator flying surfaces. The
Butterfly/Crow mix is helpful for maintaining speed during fast
descents and for creating controlled drag for spot landings.
Typically, this mix is set up so that the ailerons travel up, the flaps
travel down and the elevator is set to control any pitch changes.
You can find the Butterfly menu in „Fine Tuning, >Butterfly“.
12.9 Butterfly (Crow) Mix
5.
5.
a
b
d
f
e
c
a
b
c
d
a. Switch assignment for butterfly mix function
b. Delay for the mix function deployment or retraction
c. Flight mode setting configuration
d. Aileron /flap travel settings
e. Elevator servo travel setting
f. Butterfly Tuning
150
To Next Page
Loading...
Need help?
General
