computer radio control system
EN
The Delta/Elevon Mix uses two servos for the control of both the
elevator and aileron functions. This mix is most commonly used for
Delta type aircraft.
If you have this selected as your model’s tail type, you can find the
Delta/Elevon menu in „Fine Tuning, >Delta/Elevon“.
12.5 Delta/Elevon Mix
a. Flight mode setting configuration
b. Elevator travel setting
c. Aileron travel setting
For models equipped with spoilers, the elevator is often used to
compensate for any pitching tendencies generated when the
spoilers are deployed. You can use one of the free mixers to set up
this compensation.
12.6 Spoilers to Elevator Mix
1. From inside the „Fine Tuning>Free
mixes“ menu, press the „F2 (Add)“ button
to create a new mix.
2. In the „From“ menu line, select the
“Spoiler” input function as the master
function and in the „To“ line select the
“Elevator” for your slave function. The
“Master Value” represents the percentage
of elevator travel as it relates to the spoiler
travel. Press “F5 (Next)” to save the mix.
3. To edit the mix simply highlight the mix
and press the “F4 (Edit)” button to go into
the selected mix’s advanced menu.
5.
5.
a
c
b
147
To Next Page
Loading...
Need help?
General
